{"product_id":"vw-bus-weld-on-beam-adjusters-type-2-bus-1955-1979-16-9916-0","title":"VW Bus Weld-On Front Beam Adjusters — Type 2 Bus 1955–1979 (16-9916-0)","description":"\u003cp data-path-to-node=\"5\"\u003eTake full control over your stance with these \u003cb data-path-to-node=\"5\" data-index-in-node=\"46\"\u003eWeld-On Beam Adjusters\u003c\/b\u003e. Designed specifically for the VW Type 2 Bus, these heavy-duty adjusters allow you to convert a fixed-height factory axle beam into a fully adjustable setup. Whether you are looking for a mild drop or a more aggressive profile, these adjusters provide the mechanical versatility needed to dial in the perfect ride height.\u003c\/p\u003e\n\u003cp data-path-to-node=\"6\"\u003eFor the \"nothing to hide\" fabricator, these are a staple of any beam modification project. They provide a clean, secure way to clock your torsion leaves, ensuring your suspension remains functional and adjustable for years to come.\u003c\/p\u003e\n\u003ch3 data-path-to-node=\"7\"\u003e\u003cb data-path-to-node=\"7\" data-index-in-node=\"0\"\u003eWhy These are Essential for Your Beam:\u003c\/b\u003e\u003c\/h3\u003e\n\u003cp data-path-to-node=\"8\"\u003eOn a stock Type 2 Bus, the ride height is permanently set at the factory. By installing these adjusters, you gain the ability to:\u003c\/p\u003e\n\u003cul data-path-to-node=\"9\"\u003e\n\u003cli\u003e\n\u003cp data-path-to-node=\"9,0,0\"\u003e\u003cb data-path-to-node=\"9,0,0\" data-index-in-node=\"0\"\u003eFine-Tune Your Stance:\u003c\/b\u003e Adjust the front end to level out your Bus or clear specific wheel and tire combinations.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp data-path-to-node=\"9,1,0\"\u003e\u003cb data-path-to-node=\"9,1,0\" data-index-in-node=\"0\"\u003eMaintain Spring Tension:\u003c\/b\u003e Unlike \"cutting and turning,\" which permanently alters the spring rate, these allow you to rotate the center anchor point while maintaining proper tension.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp data-path-to-node=\"9,2,0\"\u003e\u003cb data-path-to-node=\"9,2,0\" data-index-in-node=\"0\"\u003eFuture-Proof Your Build:\u003c\/b\u003e Easily raise or lower the car for different tire setups or storage needs without ever removing the beam again.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr data-path-to-node=\"10\"\u003e\n\u003ch2 data-path-to-node=\"11\"\u003e\u003cb data-path-to-node=\"11\" data-index-in-node=\"0\"\u003eInstallation Guide: Step-by-Step\u003c\/b\u003e\u003c\/h2\u003e\n\u003cp data-path-to-node=\"12\"\u003e\u003ci data-path-to-node=\"12\" data-index-in-node=\"0\"\u003eNote: This process requires professional fabrication and welding skills. Ensure all internal grease is removed from the tubes before welding.\u003c\/i\u003e\u003c\/p\u003e\n\u003col start=\"1\" data-path-to-node=\"13\"\u003e\n\u003cli\u003e\n\u003cp data-path-to-node=\"13,0,0\"\u003e\u003cb data-path-to-node=\"13,0,0\" data-index-in-node=\"0\"\u003eDisassemble the Beam:\u003c\/b\u003e Remove the torsion leaves, bushings, and all internal components from the upper and lower tubes.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp data-path-to-node=\"13,1,0\"\u003e\u003cb data-path-to-node=\"13,1,0\" data-index-in-node=\"0\"\u003eMark Your Center:\u003c\/b\u003e Identify the factory center pin location on each tube.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp data-path-to-node=\"13,2,0\"\u003e\u003cb data-path-to-node=\"13,2,0\" data-index-in-node=\"0\"\u003eCut the Window:\u003c\/b\u003e Use a mill or a cutting wheel to cut a vertical \"window\" in the center of the tube according to the adjuster's travel range.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp data-path-to-node=\"13,3,0\"\u003e\u003cb data-path-to-node=\"13,3,0\" data-index-in-node=\"0\"\u003eRemove the Factory Anchor:\u003c\/b\u003e Clear out the original factory center set-screw housing.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp data-path-to-node=\"13,4,0\"\u003e\u003cb data-path-to-node=\"13,4,0\" data-index-in-node=\"0\"\u003ePosition the Adjuster:\u003c\/b\u003e Slide the adjuster over the tube, aligning the new set-screw hole with your cut window.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp data-path-to-node=\"13,5,0\"\u003e\u003cb data-path-to-node=\"13,5,0\" data-index-in-node=\"0\"\u003eWeld into Place:\u003c\/b\u003e Secure the adjuster brackets to the tube using high-quality MIG or TIG welding. Ensure full penetration around the perimeter of the brackets to handle the high torsion loads of a Bus suspension.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp data-path-to-node=\"13,6,0\"\u003e\u003cb data-path-to-node=\"13,6,0\" data-index-in-node=\"0\"\u003eReassemble:\u003c\/b\u003e Reinstall the torsion leaves, ensuring the center set-screw seats properly into the adjuster’s hex bracket.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp data-path-to-node=\"13,7,0\"\u003e\u003cb data-path-to-node=\"13,7,0\" data-index-in-node=\"0\"\u003eDial It In:\u003c\/b\u003e Use the two included jam nuts to lock your desired height in place.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ol\u003e","brand":"Washburn's Metal","offers":[{"title":"Default Title","offer_id":44708577378419,"sku":null,"price":45.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0278\/2760\/1523\/files\/16-9916-0-500x529.jpg?v=1775709579","url":"https:\/\/shop.washburnsmetal.com\/products\/vw-bus-weld-on-beam-adjusters-type-2-bus-1955-1979-16-9916-0","provider":"Washburn's Metal","version":"1.0","type":"link"}